Piecu vietu vienpolu sensorā slēdža vāciņš Feelspot, balts

White glass five-gang single-pole sensor switch cover Feelspot FSSD511111W (without socket). The white glass five-gang single-pole sensor switch cover is made of tempered glass, is water and fire resistant. A high-quality device will allow you to enjoy convenient control and easy maintenance. With a modern design switch, you can control the lighting of five zones in the room with a single touch when it is most needed. The five-gang single-pole sensor switch Feelspot has a built-in LED indicator that shows when the light is on/off, which will help you easily find the switch in the dark. Simple control and reliable operation sensor switch Feelspot will implement various technical and interior design solutions that meet the needs of the most demanding customer.

The tempered glass five-gang single-pole sensor switch cover Feelspot FSSD511111W can be combined with any switch, socket and other outlets. 

Advantages:

• Elegant, minimalist switch design will perfectly fit both classic and modern homes, apartments, hotels and offices interiors;
• The perfectly flat panel is easy to clean and maintain;
• Made of durable tempered glass, which is highly resistant to scratches and fading;
• High-quality sensor switch, whose lifespan is longer than standard mechanical switches - up to 100,000 cycles;
• Soft blue backlight in the off position makes it much easier to find the switch in the dark;
• Individual switches are easy to use and easy to connect;
• Suitable for all types of bulbs, including traditional bulbs, LED lighting, fluorescent lamps and energy-saving bulbs. 

Technical information:

• Type: five-gang single-pole sensor switch (five circuits);
• Materials: tempered glass (4 mm, scratch-resistant), plastic, steel;
• Switch dimensions: 370 x 86 x 35 mm;
• LED lighting: blue light diode (soft in off position and intense when on);
• Operating voltage: 110-240V AC 50 / 60Hz;
• Power consumption: ~ 0.02W;
• Operating temperature: -20 ° C to + 70 ° C;
• Control circuit load: from 4W to 300W;
• Touch sensor lifespan: 100,000 presses;
• Certificates: CE, RoHS. 

Installation:

• Before starting assembly, disconnect the power supply of the corresponding circuit. This is very important and necessary to calibrate the switch. Installing the switch with the power supply on may damage it!
• Make sure that the load created by the bulbs/lamp meets the range indicated on the sticker on the back of the module.
• Open the panel by turning a flat screwdriver counterclockwise in the designated place.
• Connect the switch mechanism according to the provided diagram.
• Secure the switch to the box. Do not remove the white sticker from the switch sensor.
• Place the glass plate on the housing and turn on the power. Do not turn on the power without attaching the glass plate, as the switch will be calibrated incorrectly.
• Over the next two minutes, the touch is calibrated. The light may turn on and off by itself.
• After calibration, the switch is ready for use.