Drewnochron Impregnāts extra plēvi veidojošs palisandrs 2,5 L

Impregnated with an additional film-forming layer, mahogany color, 2.5 l. Purpose: The impregnation is intended for protective and decorative painting of wooden items outdoors (doors, windows, garden furniture, exterior cladding, gazebos, summer houses, fences, ceiling and roof structures, etc.) and indoors in rooms not intended for permanent human presence, e.g., attics, lofts. Aqua Stop System is a technology based on the use of special water-repellent oligomeric particles, thanks to which the wood surface is perfectly protected against water absorption, and water easily runs off the coating. With this technology, painted wood is resistant to atmospheric factors. The coating is protected against mold fungi and algae. The impregnation with an additional film-forming layer is used on untreated wood and requires priming with Drewnochron Impregnat Grunt, which provides complete biological protection of wood. Main advantages of Aqua Stop System – excellent protection against water. Water-resistant coating resistant to rain, snow and sun. Wood protection against UV radiation. Optimal adhesion to wood. Preserves the wood grain. Does not cause corrosion when wood is joined with metal elements (e.g., nails, metal fittings). The coating is protected against mold fungi and algae. 7-year coating protection. Surface preparation: The surface to be painted must be clean, dry and degreased. Sand contaminated surfaces and remove dust. Untreated wood must be primed with Drewnochron Impregnat Grunt. On surfaces previously painted with impregnation, remove flaking parts, sand and remove dust. Impregnation: The impregnation must be mixed very thoroughly before and during painting. A uniform color is obtained by thoroughly mixing the product. Drewnochron Impregnat is applied with a brush. To achieve the best and long-lasting biological protection of untreated wood, apply 1–2 coats of Drewnochron Impregnat Grunt, followed by 2 coats of the impregnation with an additional film-forming layer. Impregnation must be carried out at a substrate and ambient temperature of +5 to +30 °C. Higher humidity and low temperature extend drying time. The final decorative effect depends on the wood species and the number of coats of the impregnation with an additional film-forming layer applied. Tool cleaning: Use EKO-1* solvent to wash brushes. Technical data: Coverage up to 12 m2/l per coat. Recommended number of coats: 2. Color: Mahogany. Capacity: 2.5 l. *The formulation used is part of the owner's name or a description of functionality. This is not a claim about a positive environmental effect.