Dīzeļģenerators Könner & Söhnen KS 6100HDE (EURO V)
Apraksts

Funkcijas

PIEDERUMU KOMPLEKTS
Pie ģeneratora ir pievienoti papildu piederumi: portatīvs 2P+PE 16A 230V strāvas spraudnis, portatīvs 2P+E 230V 32A strāvas spraudnis, 8x10 mm uzgriežņu atslēga, 12x14 mm un 17x19 mm uzgriežņu atslēgas un divpusējs 6,0 mm PH2 skrūvgriezis.

RĀMIS
Papildomas rėmo sutvirtinimas viršutinėmis apsauginėmis juostomis leidžia HEAVY DUTY profesionalų serijos generatoriams dirbti stipresniu režimu. Sustiprinta rėmo konstrukcija apsaugo talpyklą nuo pažeidimų eksploatuojant ir transportuojant.

KÖNNER & SÖHNEN MOTORS
The engines of diesel and gasoline generators are manufactured according to the license "DIMAX Int." GmbH and are marked with the K&S logo. High engine power compared to the generator power allows you to get the declared power and maintain stable operation under any load. All engines are tested for continuous operation, then disassembled and inspected to eliminate defects. Each engine and each generator has an individual serial number, which allows quality control of production and service. The engines comply with all European quality standards, including the latest EURO V emission standards.

INCREASED ENGINE LIFE
The "Heavy Duty" series generators can be used not only as an emergency power source, but also for long-term continuous operation. The engine resource exceeds 3000 working hours, which is confirmed by multi-hour, multi-level tests and warranty. For the equipment to be highly productive, it needs proper maintenance.

PRE-START HEATING FUNCTION
All "Heavy Duty" series generators are equipped with a pre-start heating function, which allows easy starting of the generator in winter.

ERGONOMIC CONTROL PANEL
The convenient and ergonomic generator control panel allows easy control of the entire unit and does not require additional skills. A modern smart LED display will always show the number of working hours, frequency, and output voltage. The information on the display helps to control the load of the unit and perform timely maintenance of the generator, thus extending its service life.

AVR
Könner & Söhnen series diesel generators are equipped with an intelligent AVR voltage stabilization system. It allows maintaining a constant voltage of 230 V and protects against unwanted short circuits.

RUBBER FEET
All Könner & Söhnen generator models are equipped with rubber feet that reduce vibration. The running generator will not damage the floor covering, and the frame coating will not be scratched.
Specifications
Voltage, V | 230 |
Max power, kW | 5,5 |
Rated power, kW | 5,0 |
Frequency, Hz | 50 |
Current, A (max.) | 23,91 |
Sockets | 1×16А, 1×32А |
Fuel tank volume, l | 11 |
Runtime at 50% load, h* | 8,5 |
LED display | Voltage, frequency, working hours |
Noise level Lpa/Lwa, dB | 71/96 |
DC output power, V/А | 12/8,3 |
Engine model | KS 440HD-V |
Engine type | Diesel, single-cylinder, four-stroke, air-cooled engine |
Engine power hp/kW | 12,0/8,83 |
Crankcase volume, cm3 | 1,65 |
Engine displacement, cm3 | 418 |
Power output controller | Intelligent voltage stabilization system AVR |
Engine start | Manual/electric |
Power factor, cosφ | 1 |
Frame diameter, mm | 32, round |
Battery, Ah | 30 |
ATS output | No |
Net dimensions (L*W*H), mm | 730x495x630 |
Gross dimensions (L*W*H), mm | 775x500x655 |
Net weight, kg | 107 |
Gross weight, kg | 115 |
Protection class | IP23M |
Specifikācijas
- Svars
- 0.14 kg
- Zīmols
- Konner & sohnen




















