Komutators Lanberg Modulis sfp rj45 ethernet 1gb/s varš gigabit 100m

Modulis SFP1-ETH-RJ45-1000 - Gigabit Ethernet savienojums pa vīto pāri līdz 100 m

The SFP1-ETH-RJ45-1000 module enables the use of the SFP port for data transmission via a standard network cable terminated with an RJ45 connector. It allows you to easily add a copper interface to a switch, router, server, or other compatible device.

This solution increases hardware flexibility and facilitates connecting infrastructure elements that use different transmission media. Instead of replacing the device or using an additional converter, you can use the available SFP port to connect classic Ethernet cabling.

Supports transmission up to 1000 Mb/s
The module provides data transmission at speeds up to 1 Gb/s. It can support 10/100/1000 Mb/s connections if the host device port uses an SGMII interface and supports negotiation of the required speeds.

This allows you to match the operating mode to the parameters of the connected device and the existing infrastructure. The module will work well both when expanding a Gigabit Ethernet network and when connecting devices operating at lower speeds.

Range up to 100 meters
Transmission over a distance of up to 100 m allows the module to be used in typical connections made within a building. It will work well for connecting switches, routers, servers, patch panels, and end devices located in different rooms.

The range meets standard structured cabling requirements, so the module can be easily integrated into existing infrastructure without changing the way cables are routed.

Standard RJ45 connector
The compact RJ45 connector allows you to connect popular network cables without the need for fiber optics. The module works with category 5 or higher twisted pair, which makes it easy to deploy in an existing Ethernet network.

The metal housing helps reduce the impact of electromagnetic interference, which is especially important in cabinets filled with active network and power devices.

Easy change of transmission medium
SFP1-ETH-RJ45-1000 allows you to quickly convert a compatible SFP port into a copper interface. The module is designed for hot swapping, which facilitates configuration changes and network expansion.

This is a practical solution wherever a device offers a free SFP port and the connection is to be made using twisted pair. Before use, check whether the given port supports copper modules and the required transmission mode.