F/UTP 5e kat. kabelis, datu pārraides, LSOH, Dca 4x2x24 AWG, 1Gb/s, 250 MHz, 25 gadu garantija, sertificēts INTERTEK ETL, pelēks, 305 m - ALANTEC

Certified, highest-quality ALANTEC F/UTP category 5e (Class D) data transmission cable for professional use. This cable, made of copper conductors and a shielded core, is intended for use in environments affected by electromagnetic interference. The high quality of the product has been verified by tests at the INTERTEK laboratory in the USA and at the research laboratory of the National Institute of Telecommunications in Warsaw, and compliance with industry standards has been confirmed by the relevant document: ISO/IEC 11801 (international standard based on the Polish and European standard PN-EN 50173) and ANSI/TIA-568 (standard used in the American market). The product is covered by a 25-year system warranty. These data transmission cables are intended for indoor horizontal and vertical installations in data transmission and video surveillance networks. All ALANTEC cables comply with the CPR directive on the classification of construction products by fire resistance and defining test methods for cables intended for installation in buildings. CONSTRUCTION AND ELECTRICAL PARAMETERS Category 5e Class D (100 MHz standard) with extended characteristics up to 250 MHz / 1 Gb/s Cross-section AWG 4x2x24AWG Conductors solid copper with a diameter of 0.51 mm (24AWG) Insulation polyethylene Fire classification CPR (Euroclass) Dca Core 4 twisted pairs wrapped in polyester foil Shield polyester foil coated with an aluminum layer, placed with the metal layer inward, under the shield a grounding conductor made of tinned copper wire with a diameter of min. 0.4 mmShell fire-resistant halogen-free plastic with limited emission of smoke and corrosive gases (LSOH/FRNC) violet colorPoEIEEE 802.3atColorgrayELECTRICAL PROPERTIES at 20ºDC loop resistance ≤ 95 Ω/kmAlternating resistance ≤ 2 %Insulation resistance (500 V) ≥ 5000 MΩ *kmCapacitive resistance at 800 Hznom. 48 nF/kmAlternating capacitive resistance ≤ 1500 pF/kmCharacteristic impedance (1–100 MHz) (100 ± 15) ΩNominal propagation velocity (NVP) 69 %Delay skewNominal ≤ 535 ns/100 mDelay angleNominal ≤ 20 ns/100 mDC installation tester, 1 min. (core) 1000 VMECHANICAL PROPERTIESBending radius 4 x outer ø Max. pulling force 80 N Operating temperature range from -30 °C to + 50 °C Installation temperature range from 0 °C to + 50 °C Outer diameter 6.3 mm Weight kg/km 44 kg Package size (305 m)