- Comprehensive tool set
- High quality and durable
- Excellent value for money
The Alphacool HardTube Bending Kit Basic is a universal tool set for anyone who wants to equip their computer with hard tubes. The Hardtube Basic kit contains the most important tools needed for bending hard tubes.
Alphacool acrylic tube reamer (article 29115).The Alphacool deburring tool has three sharp edges with steel blades for deburring hard tubes from the inside and removing rough sections. On the other side of the tool there are steel blades for deburring the cut outer edge of the hard tube. This ensures a perfect seal with your fittings.
Alphacool Eiskoffer HardTube saw (article 29134).With this miter box, cutting hard tubes is a breeze. Special rubber channels for 13 mm and 16 mm hard tubes prevent the tubes from slipping and getting scratched. The miter box can be secured with two small screw clamps.
Alphacool acrylic dual bending tool 12/14/16 mm (product no. 29124).Alphacool now has a bending tool for different sizes that makes laying and bending hard tubes much easier! Hard tubes 12–14 mm and 16 mm thick cause no problems. They bend neatly and easily at angles up to 180°. Using the red rubber measuring guide, you can determine the size of the straight tube section in centimeters.
Alphacool double saw for acrylic/PETG tubes (product no. 29125).The Alphacool double saw for acrylic/PETG tubes is not an ordinary saw from a hardware store. Its special saw blade with fine teeth is perfect for cutting acrylic/PETG tubes. This saw blade eliminates common problems. Even on the first contact with the tube, the teeth cut through the acrylic so smoothly that it does not slip. Thanks to the fine saw teeth, the tube also does not break or crack during the final cuts. This is a familiar problem: you want to make a straight cut with a saw, but due to the thin saw blade every cut turns out slightly curved?! Here this is not a problem. This saw blade is thick enough not to bend, yet still thin enough for precise cutting. With the Alphacool double saw, every cut is neat and straight right to the last stroke.
„Alphacool“ silikono lenkimo įdėklas 100 cm, 10 mm ir 13 mm skersmens (produkto kodai 29117 ir 29126).Norint nepriekaištingai sulenkti „Alphacool HardTube“ vamzdį, dabar yra puikus sprendimas. Tiesiog įkiškite silikoną į „HardTube“ vamzdį ir pašildykite norimą vietą. Dėl itin karščiui atsparaus silikono vamzdį galima lenkti, o sulenktas galas nesulinksta. Atvėsusį silikoną galima lengvai nuimti.
