- Procesora šķidruma dzesēšanas komplekts 12 cm
- Supported CPU sockets: LGA 1150 (H3 socket), LGA 1151 (H4 socket), LGA 1155 (H2 socket), LGA 1156 (H2 socket), LGA 1200 (H5 socket), LGA 1700, LGA 2066, Socket AM4, Socket AM5
- 62.8 cubic feet per minute at 2.13 mm H2O hydraulic
- 120 x 120 x 25 mm
- Black
Alphacool introduces the Core Ocean AiO - a universal solution that, due to its excellent price-to-quality ratio, allows starting to cool processors with water efficiently. The difference from the Eisbaer CPU AiO is that the Ocean All-in-One cannot be expanded. Adding additional components such as GPU coolers, radiators, or expansion tanks is not intended here. However, that is also unnecessary! Properly selected components and the Core Ocean design ensure a long service life and require little maintenance while water cooling all standard AMD and Intel sockets. Aluminum radiator. Compared to Alphacool's fully copper models, the T38 aluminum radiator has additional cooling channels. This technical design allows significantly increasing cooling capacity without restricting water flow inside the radiator. Due to its low 38 mm height, the radiator with a single-sided fan assembly fits even into the narrowest case and provides high-performance CPU water cooling. Core fan. Fan speed can be adjusted from 0 to 2500 RPM via a 4-pin PWM connection. Cable length is 40 cm. This allows connecting the fan to the motherboard or a special controller without requiring additional adapter cables or extensions. At 2500 RPM, it provides 62.8 CFM airflow and a high 2.13 mm/H2O static pressure. Therefore, the fan is excellent for mounting on water cooling system radiators. Cooler and pump As with all Alphacool products, the radiator base is made of copper and has very fine cooling fins distributed across the entire base. The jet plate ensures accelerated flow through the cooling fins, increasing cooling performance. Water flow is optimized so that all areas of the cooler base are cooled evenly. The cooler is compatible with all standard AMD and Intel sockets. The integrated pump speed range is 2500–3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the motherboard or an external controller via an existing 4-pin fan connector. This allows controlling and monitoring the pump speed range. Tubes and fittings FEP tubes are 40 cm long, sleeved, and very flexible. Rotatable 360° fittings on the cooler and radiator are fixedly mounted and cannot be replaced. However, the combination of tubes and fittings allows very versatile placement of the all-in-one even in the tightest computer case. Lighting 12 digitally controlled 5V RGB LEDs are built into the pump housing, creating a unique, very elegant lighting effect. Digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a motherboard supporting digital RGB. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal paste Included thermal paste features 7.5 W/mK thermal conductivity. The thermal paste does not harden, is particularly suitable for high contact pressure, and can be applied excellently due to optimally selected viscosity.
