Teroson Līme Ms 9220 Bk Melna 310Ml (2026592)

TEROSON Adhesives and sealants TEROSON MS 9220 BK Black cartridge 310ml TEROSON MS 9220 is a solvent-free and isocyanate-free adhesive for bonding various substrates such as stainless steel, aluminum and other metals, wood and painted surfaces. The drying time is 15 minutes. Dosing using any professional plunger extruder, e.g., The surface is recommended to be prepared with TEROSON® VR 10 cleaner. Flexible product with excellent sealing properties High resistance to aging, external factors and UV radiation Resistant to salt water. curing Isocyanate-free Solvent-free Application: Terostat 9220 can be used in the following areas: body and vehicle construction, wagon and container construction, boat and shipbuilding, facade, machine and metal industry, for flexible bonding without primers and with high quality, for metal and painted surfaces. Terostat 9220 is also suitable for bonding glass, ceramic surfaces and many plastics, with the exception of Teflon, PE, PP and mixtures of these polymers. Terostat 9220 can replace mechanical joining methods such as screwing, welding and stitching. Application: Before applying the mass, read the precautions and safety recommendations in the safety data sheet. You should also take general precautions when using chemicals. Surface preparation: The surfaces to be bonded must be dry, clean, free of dust, grease and sand and other elements that can reduce adhesion. FL Remover is suitable for washing. Application: To apply Terostat 9220 mass from 310 ml cartridges, use a Teroson Staku-Pistole manual applicator or a Teroson Power-Line-Pistole or Teroson Multi-Press-Pistole pneumatic applicator. The operating air pressure must be between 2 and 5 bar. To clean tools made of uncured material, we recommend using Remover FL or Remover D. Note: The information provided, especially regarding the application and use of the adhesive, is based on our knowledge and experience. No information contained in this technical data sheet or any verbal advice given can be the basis for liability. Technical data: Color: black Odor: odorless Consistency: thixotropic paste Density: approx. 1.4 g/cm3 Stability: very good (ISO 7390, profile U 20) Curing method: moisture-cured Skin formation time: 10 - 20 min. Standard DIN 50014: 23 °C, 50% relative humidity) Curing speed: approx. 3.5 mm/24 h (Standard DIN 50014: 23 °C, 50% relative humidity) Shore A hardness: approx. 55 - 60 (DIN 53505) Tensile strength (DIN 53504): approx. 3.3 MPa Shear strength (DIN EN 1465): approx. 4.4 MPa Volume change (DIN 52451): Application temperature: -40 °C to +100 °C (short-term up to 1 hour): +120 °C. Everything for paint shops! ‧